Day 1: The Tank Arrives

One of the most difficult things to do in our business is get some of these larger than life aquariums delivered and placed correctly in the customer’s home. Today we began the installation of a 450 Gallon custom glass aquarium that weighed in around 1500 lbs. The aquarium itself is 92″ × 32″ × 36″, the cabinetry underneath (and final footprint) measures 93.5″ × 32.75″ × 36″, and the upper canopy is 93.5″ × 32.75″ × 8″. The total height of the aquarium with the hood on is 77.75″ tall! (2.25″ of the canopy hangs down over the top of the tank.) Basically, it was really big and really heavy.

When the truck arrived it was a crisp 24 degrees out, and somewhere around 8 degrees with the wind chill.

The truck arrives

A shot from inside the truck. We were actually lucky that the truck was able to back up that close to the house. You can see in the previous picture all the low trees that the truck was barely able to clear. Otherwise it would have been an extra 300 feet of driveway to roll the tank down.

Aquarium in Truck

Brian, Matt, and Jean were a little busy, but I still got them to pause for a picture. You can see how close the tank was to the door frame on both sides here. We had to use cardboard to protect the tank from getting scratched by the frame.

Tank at front door

It took a little work, but we got the tank inside next to the stand. Now all we have to do is get 1500lbs 36″ into the air and safely onto the stand. Oh, I also leveled the stand before putting the tank on so we need to do this without moving the stand. (I think I saw some of the guys rolled their eyes when I mentioned that.)

 

Tank next to stand

Here’s the tank on the steel stand. What? You thought that was going to be difficult? Ok, maybe it took a little engineering, and some muscle, but it’s on there. We didn’t even move the stand… that much.

Steel Stand

This is what the area looked like before we brought the tank in:

Wall for the aquarium

Here’s the tank with the cabinetry in place. It actually has vertical corner pieces to give it a more finished look, but they need some adjustment so they will have to go on later.

Custom Glass Aquarium

Couldn’t have done it without such a great group of guys.

Aquarium Network Team

Thanks for reading, on the next install day I will be installing the plumbing for all of the filtration so stay tuned.

Update: Check out the continued story – Day 2: Filtration

 

-Michael Ammirati